Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] depth info integration between LH2 and LH3
03-09-20, 02:22 PM (This post was last modified: 03-09-20 02:26 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] depth info integration between LH2 and LH3
I have an a127 at my main nav station and bought an Axiom 7 to use at my aft steering station. I understand that it is not possible to integrate these fully via ethernet, but all I am looking to get is the depth info from the A127 to the Axiom: Is there any way to do this, even if it is via NMEA 0183?
Find all posts by this user
Quote this message in a reply
03-09-20, 02:44 PM (This post was last modified: 03-09-20 02:45 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] depth info integration between LH2 and LH3
Welcome to the Raymarine Forum ihtruelsen,

Unlike the Axiom Pro & Axiom XL MFDs, the Axiom MFDs do not feature a NMEA 0183 communications interface. It is recommended that these MFDs each be interfaced as a spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone to permit them to share numerical depth data (not to be confused with fishfinder feautures).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)