Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 12” axiom pro and 9” axiom
03-17-20, 01:39 PM
Post: #8
RE: [CA11] 12” axiom pro and 9” axiom
Robert,

Q1. Will the ray marine rv-100 Mark fish at high speeds (30 mph)?
A1. The fishfinding, particularly marking features of the Raymarine fishfinding products are primarily designed for operation at trolling speeds. As transom mounted transducers will typically lose bottom contact a lower speeds than in-hull or thru-hull transducers, an in-hull or thru-hull 50kHz/200kHz transducer is recommended for high speed / low draft hull to better aid in bottom tracking while operating at planing speeds.

Q2. If so is there any added benifits for me running a addional 50/200 p64 transducer ?
A2. Please see the response to Q1. Please additionally note that Raymarine does not offer a transducer having the product name P64. Should you have intended to reference the P74 transducer, then it indeed is commonly epoxied to the inside of hulls to function as an in-hull transducer to support higher speed bottom tracking.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] 12” axiom pro and 9” axiom - Chuck - Raymarine - Moderator - 03-17-20 01:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)