Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RD418HD E92142, power/data cable
03-13-20, 06:20 AM (This post was last modified: 03-13-20 09:26 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RD418HD E92142, power/data cable
I have an axiom pro rvx and am adding a RD418HD E92142 radar. I just want to confirm what is the part number for the power/data cable needed to plug this in directly to the back of the axiom pro rvx.

Thanks
Mike
Find all posts by this user
Quote this message in a reply
03-13-20, 09:35 AM (This post was last modified: 03-13-20 10:09 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] RD418HD E92142, power/data cable
Welcome to the Raymarine Forum Mike,

An A80227 5m, A80228 10m, A80229 15m, or A80230 25m Digital Radar Cable may be used to interface one of the MFD's Ethernent (RayNet) Network sockets the RD418HD radome. This cable features power leads which should be interfaced to a dedicated 12VDC or 24VDC switched power circuit.
Find all posts by this user
Quote this message in a reply
03-13-20, 10:40 AM
Post: #3
RE: [CA11] RD418HD E92142, power/data cable
Chuck,

Fast response as always! A true value to this forum. Thank you again!

Mike
Find all posts by this user
Quote this message in a reply
03-13-20, 11:32 AM
Post: #4
RE: [CA11] RD418HD E92142, power/data cable
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)