Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CC11] Can I live stream a third party camera that is H.265 compliance?
05-01-20, 12:12 PM (This post was last modified: 05-04-20 03:05 PM by Chris - Raymarine - Moderator.)
Post: #1
[CC11] Can I live stream a third party camera that is H.265 compliance?
Can I live stream a third party wired IP camera that is H.265 compliance?
Many cameras that is H.265 can comply to H.264, so can I use it to live stream to Axiom MFD?


> - Network/IP Cameras (ex. Raymarine CAM210, CAM220, CAM200IP, FLIR
> M132/M232 Thermal Cameras (MFDs running LH3 software only ... MFDs
> running LightHouse II software will be able to display video only from
> these thermal cameras), etc.) and video encoders (ex. Axis M70 Series
> Encoders (M7011, M7014, M7016), etc.)
> IP Camera Product Requirements:
> - Must support H.264 video compression
> - Must support RTSP (Real Time Streaming Protocol)
> - Must support ONVIF Service Detection (ONVIF User Authentication MUST
> BE DISABLED)
> - Must have DHCP enabled & Dynamic IP set to ON
> - 720p resolution or 1080P

http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
05-06-20, 01:16 PM
Post: #2
RE: [CC11] Can I live stream a third party camera that is H.265 compliance?
Hello Ray18,

Please see a faq regarding this question, https://forum.raymarine.com/printthread.php?tid=31
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)