Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Compatibility
03-15-20, 10:56 AM (This post was last modified: 03-16-20 03:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Compatibility
I am considering an Axiom 12 MFD to replace my aging electronics. My current electronics are circa 1997 vintage. My transducer is connected to a Raytheon V850 color echo sounder that will be eliminated. I am planning to have my boat hauled next year to replace the transducer along with some other maintenance issues.
My question is will my current transducer connect to the new Axiom 12 just to give me depth readings until I can have the proper transducer installed? If not, then will a Raymarine ST60 display work with the transducer?
Find all posts by this user
Quote this message in a reply
03-18-20, 10:21 AM (This post was last modified: 03-18-20 10:26 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Compatibility
Welcome to the Raymarine Forum Loujo,

While the V850's transducer cannot be adapted to support an Axiom MFD's fishfinder features, there is a possibility that it may instead be interfaced to an instrument. Please click here to view a FAQ addressing this subject. As this is a very old transducer design, no guarantees may be made.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)