Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] RAY60 NMEA183-input, no GPS-data
03-16-20, 08:35 AM (This post was last modified: 03-16-20 03:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] RAY60 NMEA183-input, no GPS-data
Hello to the specs

I have a problem connecting a RAY60 to a NMEA-183 output to receive GPS data.
The RAY60 has already been tested and works perfectly via STng, but does not receive GPS data via the NMEA183 input.

The NMEA183 source is a Shipmodul MPX-3 multiplexer that sends the GLL, RMC and GGA datasets at 4800/8 / n / 1.
The data was tested with the OpenCPN software and works very well.

In the attachment you will find a short log file with the sent records.

Hope someone can help me solve the problem.

best regards from Ruegen Island,

Claus

Dreams are the beginning of everything ...
Find all posts by this user
Quote this message in a reply
03-18-20, 09:27 AM
Post: #2
RE: [DG11] RAY60 NMEA183-input, no GPS-data
Dear Peanpe,

Thank you for your post.

Are you connecting to STng and NMEA0183 simultaneously?

Please send in a system diagram for me to look at.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)