Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Rv-100 transducer to Aseries
03-17-20, 05:48 PM (This post was last modified: 03-18-20 01:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Rv-100 transducer to Aseries
Hello

I recently was given a 12.1 a series unit. I was told that I would need to get a all in one transducer for the unit. I did some research and thought the RV-100 was the transducer that I needed but it is a 25 pin connector and the unit needs a 7 pin connector. Is there a adapter I can buy. Any help would be appreciated. Thanks!
Find all posts by this user
Quote this message in a reply
03-18-20, 01:36 PM
Post: #2
RE: [CA11] Rv-100 transducer to Aseries
Welcome to the Raymarine Forum Warelwood,

Unfortunately, your research yielded incorrect results. RealVision Transducers (ex. RV-100, etc.) cannot be used with a/c/e-Series MFDs. Should the MFD's product name end in "7" (ex. a67, c97, e127), then it may be interfaced to the transducers found here. Should the MFD's product name end in "8" (ex. a68, a78, etc.), then it may be interfaced to the transducers found here. Should the MFD's product name end in "5" (ex. a65, c96, e125), then it may not be directly interfaced to a fishfinder transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)