Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Network Diagram - DUAL AXIOM MFDs
03-27-20, 01:17 PM (This post was last modified: 03-27-20 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Network Diagram - DUAL AXIOM MFDs
I would appreciate it if you could review the attached network diagram using the following equipment:

2 - Axiom 9 MFD with internal sonar
Raydome 418HD Radar
Ray 53 VHF Radio
Fusion RA 70 Marine radio
RV-100 - downvision Transducer
CP370 Sonar Module
B260 Transducer
HS5 Ethernet Switch
Seatalk


Attached File(s)
.pdf  OFF_LINE_ELECTRONICS.pdf (Size: 455.47 KB / Downloads: 496)
Find all posts by this user
Quote this message in a reply
03-27-20, 01:28 PM
Post: #2
RE: [CA11] Network Diagram - DUAL AXIOM MFDs
Welcome to the Raymarine Forum msantella,

Your network diagram is off to a good start. It appears to only be missing the following items:

- a spur (white) socket within the backbone, through which the backbone will be powered from a switched 12VDC power circuit. Please click here to view a FAQ addressing how additional spur sockets may be added to the backbone.

- SeaTalkng Termination Plugs within the backbone's two end sockets
Find all posts by this user
Quote this message in a reply
03-30-20, 07:19 AM
Post: #3
RE: [CA11] Network Diagram - DUAL AXIOM MFDs
Chuck, realized that my Fusion stereo is not network capable so I have the following drawing for review:

Thanks


Attached File(s)
.pdf  OFF_LINE_ELECTRONICS_REV2.pdf (Size: 430.59 KB / Downloads: 388)
Find all posts by this user
Quote this message in a reply
03-30-20, 07:46 AM
Post: #4
RE: [CA11] Network Diagram - DUAL AXIOM MFDs
Mark,

The only item which appears to be missing from the diagram is a power connection to the VHF radio. Otherwise, good job.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)