Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 RV to NMEA 2000 Network
04-02-20, 04:35 AM (This post was last modified: 04-02-20 09:16 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 9 RV to NMEA 2000 Network
Hi,

I'm using Axiom 9 RV as fishfinder and now I want to expand functionality and integrate fuel tank NMEA2000 sensor with Axiom 9 MFD.

Axiom 9 has Power/NMEA 2000 cable connects to the rear of the MFD.

My question is, does Axiom NMEA 2000 input/output gives supply for the whole NMEA network or I need to supply NMEA 2000 network from outside power (as it is usual for NMEA2000 Networks).

Thanks
Danijel
Find all posts by this user
Quote this message in a reply
04-02-20, 09:18 AM
Post: #2
RE: [CA11] Axiom 9 RV to NMEA 2000 Network
Welcome to the Raymarine Forum Danijel,

Q1. Does Axiom NMEA 2000 input/output gives supply for the whole NMEA network
A1. Negative. Raymarine MFDs are neither designed to supply power to nor be powered by a SeaTalkng / NMEA 2000 backbone.

Q2. Do. I need to supply NMEA 2000 network from outside power (as it is usual for NMEA2000 Networks).
A2. Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)