Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adaptor Plate
04-07-20, 12:37 PM (This post was last modified: 04-07-20 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Adaptor Plate
Good day,

Has anyone used the Raymarine A80531 adapter plate to install the Axion 12 Pro MFD in place of the e120w MFD cutout? Is there sufficient overlap on the tops and sides of the adapter to use a marine sealant as the unit will be installed outside...?

Thanks
Find all posts by this user
Quote this message in a reply
04-09-20, 08:32 AM
Post: #2
RE: [CA11] Adaptor Plate
Welcome to the Raymarine Forum Yachtmaster,

Q. Is there sufficient overlap on the tops and sides of the adapter to use a marine sealant as the unit will be installed outside...?
A. Indeed you should find that the adapter plate overlaps the mounting surface sufficiently to permit sealant to be applied between the mounting surface and the adapter plate.
Find all posts by this user
Quote this message in a reply
04-10-20, 07:01 AM (This post was last modified: 04-10-20 08:29 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Adaptor Plate
Thanks.....
Find all posts by this user
Quote this message in a reply
04-10-20, 08:29 AM
Post: #4
RE: [CA11] Adaptor Plate
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)