Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Speed through water device with Axiom 9 rv.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Speed through water device with Axiom 9 rv.
04-07-20, 05:28 PM (This post was last modified: 04-08-20 02:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
Melaniedawn2017@gmail.com Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2020
Reputation: 0
[CA11] Speed through water device with Axiom 9 rv.
I just purchased an Axiom 9 RV MFD.
We are removing our previous Humminbird FF that supplied us STW via a paddlewheel. Will a replacement NMEA2000 Speed sensor work with the axiom9?

Like - Navico Speed Sensor - Transom Mount [000-11519-001]
Find all posts by this user
Quote this message in a reply
04-08-20, 01:57 PM (This post was last modified: 04-08-20 02:09 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Speed through water device with Axiom 9 rv.
Welcome to the Raymarine Forum Melaniedawn2017,

Q. Will a replacement NMEA2000 Speed sensor work with the axiom9?
A. Yes. However, should any calibration of the sensor be required, then it would have to be performed in the manner specified by the sensor manufacturer, as the Axiom MFD would be unable to perform this calibration.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication