Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Airmar B60-20
04-19-20, 12:24 PM (This post was last modified: 04-20-20 05:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Airmar B60-20
Can I use a B60-20 Airmar Transducer with my es78 MFD? I have both and would like to take advantage of more of the es78 capabilities. I have not bored the [censored] in the hull yet.....

Taylor
Find all posts by this user
Quote this message in a reply
04-20-20, 05:16 PM
Post: #2
RE: [CA11] Airmar B60-20
Welcome to the Raymarine Forum Taylor,

Raymarine's ax8 and eSx8 MFD feature internal DownVision fishfinder sonar circuitry. These MFDs may only be directly interfaced to DownVision or CPT-S fishfinder transducers. Should one desire to use a compatible 50kHz/200kHz transducer with the system, then it would be necessary to interface the MFD to a CP370 Fishfinder Sounder Module which in turn will be interfaced to the transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-26-20, 08:09 PM
Post: #3
RE: [CA11] Airmar B60-20
I have now purchased the right transducer but need an extension cable. Which cable should I purchase for the CPT S transducer?
Find all posts by this user
Quote this message in a reply
04-27-20, 07:27 AM
Post: #4
RE: [CA11] Airmar B60-20
Taylor,

Raymarine offers the A80273 4m DownVision Transducer Extension Cable for use with DownVision or CPT-S transducers.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)