Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] a98 and Q24D Doppler
04-28-20, 08:43 PM (This post was last modified: 04-29-20 01:18 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] a98 and Q24D Doppler
HI,
Looking at purchasing a new scanner. I read the Quantum 2 Q24C will work with the A98 but will the new Q24D Doppler radar work with the A98 also?
Thanks
Find all posts by this user
Quote this message in a reply
04-29-20, 01:09 AM (This post was last modified: 04-29-20 01:20 PM by Chuck - Raymarine - Moderator.)
Post: #2
[TG11] RE: a98 and Q24D Doppler
Hello unixdood,

No, Lighthouse2 software doesn't support the Doppler features. Technically a Q24D will work in non-Doppler mode so it is still work considering a Q24D if you plan to upgrade the a98 in the future and want to ready for Doppler, but until then a standard Quantum and a Q24D will operate identically on an a98.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-29-20, 10:01 AM (This post was last modified: 04-29-20 01:20 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] a98 and Q24D Doppler
thanks Tom
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)