Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] st2 / stng integration compatibility
04-29-20, 09:47 AM (This post was last modified: 04-29-20 02:57 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] st2 / stng integration compatibility
i would like to use a RAYMARINE E22067 ST290 ACTIVE DEPTH POD in my stng network. any chance this might work. existing network includes a st70 mfid
bucky
Find all posts by this user
Quote this message in a reply
04-29-20, 03:20 PM (This post was last modified: 04-29-20 03:22 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] st2 / stng integration compatibility
Welcome to the Raymarine Forum Bucky,

It is indeed possible to use a ST290 Pod with any of the following products:
- i70/i70S MFID
- ST70/ST70+ MFID
- ST290 DPU

Failed ST290 pods may be replace with an iTC-5 Analog Instrument Converter.
Find all posts by this user
Quote this message in a reply
04-30-20, 12:32 AM
Post: #3
RE: [CA11] st2 / stng integration compatibility
thanks again chuck
bucky
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)