Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raster charts for Lighthouse 3?
05-03-20, 09:40 AM
Post: #1
Raster charts for Lighthouse 3?
Is there any way to load Lighthouse (NOAA) raster charts on a new Axiom running LH3? The website does not make it very clear.
Find all posts by this user
Quote this message in a reply
05-07-20, 03:26 PM
Post: #2
RE: Raster charts for Lighthouse 3?
Hello teecat,

All software versions of the Axioms are compatible with the NOAA raster charts. While the NOAA raster chart is inserted in the card reader go to the Chart page, select menu, settings and then select the NOAA raster chart from the list.

Chris,
Find all posts by this user
Quote this message in a reply
05-14-20, 03:59 PM (This post was last modified: 05-14-20 09:31 PM by Tom - Raymarine - Moderator.)
Post: #3
RE: [CC11] Raster charts for Lighthouse 3?
Thanks Chris - sorry, should have been more specific: I meant to source the NOAA raster charts. The link https://www.raymarine.com/marine-charts/lighthouse.html references "purchasing charts", but with no further explanation that I see. Also, I can't get my LH3 Axiom display to initialize a blank SD card per the instructions on this link.
Find all posts by this user
Quote this message in a reply
05-18-20, 08:11 AM
Post: #4
RE: Raster charts for Lighthouse 3?
Hello teecat,

Please see this FAQ on the subject, https://forum.raymarine.com/showthread.p...&pid=38618

Additionally the chart store launch is currently scheduled for June.

Chris,
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)