Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] Seatalk Power Cable
05-03-20, 01:40 PM (This post was last modified: 05-04-20 11:17 PM by Jules - Raymarine - Moderator.)
Post: #1
Seatalk Power Cable
The Seatalkng power cable A06049 has three wires; red, black and a bare wire. What is the bare wire for and should it be connected somewhere...?

Thanks...
Find all posts by this user
Quote this message in a reply
05-05-20, 12:06 AM
Post: #2
RE: Seatalk Power Cable
Hi Yachtmaster,

The red wire is the positive conductor, the black is the negative conductor and the bare wire is the shield wire. The shield wire is there to help protect the power lead from electrical interference induction. Please connect the bare shield wire to the negative conductor.

It is important that shield wires on any power leads get connected and not be left just sitting there, especially on screens that are touch operated.

Happy boating

Kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)