Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] E Series thru hull transducer, steel hull.
05-05-20, 04:57 AM (This post was last modified: 05-07-20 10:30 PM by Tom - Raymarine - Moderator.)
Post: #1
E Series thru hull transducer, steel hull.
Can you please advise the appropriate thru hull transducer model for the E Series E127 multifunction display.

I would prefer it to be made of plastic and also need a supplier in northern NSW, Australia.

The transducer must be able to be adjusted for up to 20 deg deadrise.
Find all posts by this user
Quote this message in a reply
05-07-20, 10:37 PM
Post: #2
RE: E Series thru hull transducer, steel hull.
Hello Kira,

We don't do a plastic through-hull suitable for that angle of deadrise that's e127-compatible. We do offer a stainless-steel version though, the A80570 SS60 20-degree tilt with an E66066 adaptor cable. In plastic we only have 0-degree tilt that are directly compatible with that display.

We have a dealer locator at https://www.raymarine.com.au/buy/find-a-dealer.html: we have 2 dealers in each of Coffs Harbour or Port Macquarie, or on the Gold Coast.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)