Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] How save waypoints .GPX into thw C140W
05-05-20, 08:02 AM (This post was last modified: 05-07-20 10:51 PM by Tom - Raymarine - Moderator.)
Post: #1
How save waypoints .GPX into thw C140W
Good morning I have a C140W multifunction and a DragonFly on the boat. I would like to know how I can transfer waypoints from one plotter to another. I use NAVIONICS cartography. Thank you
Find all posts by this user
Quote this message in a reply
05-07-20, 10:58 PM
Post: #2
RE: How save waypoints .GPX into thw C140W
Hello Cesar Tuna,

The C-series Widescreen displays use an older, proprietary Raymarine file format rather than the more modern GPX. You can find an FAQ that describes how to convert between the two here.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)