Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] Multiple Data Master Error
05-05-20, 07:08 PM (This post was last modified: 05-06-20 12:33 AM by Jules - Raymarine - Moderator.)
Post: #1
Question Multiple Data Master Error
I have 2 MFD (Axiom 12 and Axiom 7). When both are turned on, intermittently, I get a multiple data master error followed by a brief screen pops= up, as show in the attachment, only for a second or two. I am unable to select anything due to it disappearing so fast.

Basically, I somehow need to assign the Axiom 7 as a DM?

Any help would be appreciated!
Find all posts by this user
Quote this message in a reply
05-06-20, 12:45 AM
Post: #2
RE: Multiple Data Master Error
Hi sgdunn,

Welcome to the forum,

As indicated in your photo with the Axiom 7 at the top of the networked devices - you need to press "Assign as datamaster" as shown on the pop-up. Alternatively, when you see the pop-up message to select a data master display you select the one you want.

This is described in the Operation manual for Lighthouse 3.11 at the bottom of this page https://www.raymarine.com/multifunction-...xiom7.html

Hope this helps

Happy boating

Kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)