Raymarine forum / Raymarine Forums / Multifunction Displays v / [JB] Measuring distance in the chart mode

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] Measuring distance in the chart mode
05-08-20, 07:45 AM (This post was last modified: 05-11-20 02:33 AM by Jules - Raymarine - Moderator.)
Post: #1
Glorydays Offline
Junior Member
**
 		Posts: 5
Joined: May 2020
Reputation: 0
Measuring distance in the chart mode
I recently upgraded from E120s to new Axiom 12 with one hybrid and one repeater. I opted for Navionics cartography. Is there a way to measure distance from point to point as was possible with the E120 units with Axiom?
Find all posts by this user
Quote this message in a reply
05-11-20, 02:39 AM
Post: #2
Jules - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 98
Joined: Oct 2019
Reputation: 0
RE: Measuring distance in the chart mode
Hi Glorydays,

Welcome to the forum,

Currently Axioms' Lighthouse III operating system does not have a "Ruler" feature as the previous Lighthouse II operating system did. This is something that has been requested strongly and you should see it become available soon.

Please subscribe to our newsletter to be notified of software updates when they become available.

Happy boating

Kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication