Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] CPT120 Tranducer with Axiom or Axiom Pro?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] CPT120 Tranducer with Axiom or Axiom Pro?
05-13-20, 08:13 PM (This post was last modified: 05-15-20 12:38 AM by Tom - Raymarine - Moderator.)
Post: #1
TheOiler Offline
Junior Member
**
 		Posts: 11
Joined: May 2016
Reputation: 0
[TG11] CPT120 Tranducer with Axiom or Axiom Pro?
I'm planning an upgrade from an eS78 to an Axiom or Axiom pro. I now have a CPT120 transducer. Is this transducer compatible with Axiom?
Or will the recommended transducer fit in the CPT120's bore size for installation?
Find all posts by this user
Quote this message in a reply
05-15-20, 12:44 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] CPT120 Tranducer with Axiom or Axiom Pro?
Hello TheOiler,

Yes, you can use the eS78's CPT120 with an Axiom 7 DV, Axiom 7/9/12 RV or Axiom Pro RVX via an adaptor cable, part numbers as follows:
  • Axiom 7 DV: no adaptor required, direct connect
  • Axiom 7/9/12 RV: A80490
  • Axiom Pro RVX: A80490

Axiom non-RV/non-DV and Axiom Pro S are not compatible with this transducer.

To get the RealVision 3D and SideVision images, you would need to change the CPT120 for the RV-series transducer(s) suitable for your hull.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication