Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RAY101E not transmitting
05-13-20, 03:36 PM
Post: #1
RAY101E not transmitting
Hi,

My RAY101E handheld VHF is not transmitting on any channel.

Everything looks normal, and it receives happily.

However when you try to transmit,
it cycles through the channel 08 screen with all the symbols,
the channel 43 screen with no symbols,
and back to the channel you are trying to transmit on.

Switching off and then resetting by holding down the * and HI/LO USER keys and then switching on, brings up the channel 08 screen with all the symbols and then the channel 43 screen with no symbols, until you release the two keys and it returns to the normal channel 16 screen.

Any suggestions appreciated
Find all posts by this user
Quote this message in a reply
05-18-20, 11:36 AM
Post: #2
RE: RAY101E not transmitting
Hello Mike,

You are performing the reset correctly. The next step would be to look at getting the unit evaluated or replaced. Please see the links below,

Locate a Raymarine dealer, https://www.raymarine.com/buy/find-a-dealer.html

Service, https://www.raymarine.com/view/index-id=779.html

Chris,
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)