Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL80C Not Starting
06-15-16, 01:18 PM
Post: #1
RL80C Not Starting
Hello,

I'm having a problem with it not starting. Sometimes just a flicker on pressing the button, but mostly nothing at all. I tried re-attaching the plugs, and got one normal startup then nothing after that. There is no visible corrosion on the plugs. Any advice on solving this would be much appreciated.

thank you,

Tim
Find all posts by this user
Quote this message in a reply
06-15-16, 02:08 PM
Post: #2
RE: RL80C Not Starting
Welcome to the Raymarine Technical Forum Tim,

It is recommended that the power cable be unplugged from the display's power socket and that the loaded system voltage then be measured at the plug to ensure that the measured loaded system voltage is within the operating range of the hsb/hsb2/SL Pathfinder Series Radar Display (10.7-32.0 VDC). If so, then the display would be deemed to have suffered an internal failure necessitating that it be replaced, as Raymarine's Product Repair Center can no longer service hsb/hsb2/SL Pathfinder Series Radar, Chartplotter, and Fishfinder Displays.

Please click here to view a FAQ addressing how a hsb/hsb2/SL Pathfinder Series Display would be replaced with a currently manufactured MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)