The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] GPS data source selection "internal" or "internal (active)"

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] GPS data source selection "internal" or "internal (active)"
05-19-20, 12:32 AM (This post was last modified: 05-20-20 11:25 PM by Tom - Raymarine - Moderator.)
Post: #1
tmass60 Offline
Junior Member
**
 		Posts: 15
Joined: Sep 2018
Reputation: 0
[TG11] GPS data source selection "internal" or "internal (active)"
I have recently completed a software upgrade on all the components of my system (see attached). It appears that the data source selection for GPS position and datum was is set to "Auto" after the software upgrade and I am unsure what this was set to prior to the upgrade.

In the case of GPS position and datum (and maybe time/date) the available choices for data source are "Auto", "0320444 internal", and "0320444 internal (active)". The latter two choices are the master MFD but seeing they are both the same should I be selecting the "active" one from the list or does it not matter? Why is this duplicated in the list?

Thanks,

tmass60


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] GPS data source selection "internal" or "internal (active)" - tmass60 - 05-19-20 12:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication