Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 and airmar compatibility
05-21-20, 02:58 PM
Post: #1
Axiom 7 and airmar compatibility
I have a e7 with hybrid touch. I have an airmar st850pv for speed and an airmar dt800pv for depth I also have an St 70+ display at the mast. I’m looking to upgrade to the axiom 7 to take advantage of the lighthouse sailing features and want to know it this is all going to be comparable and work on the network. Thanks
Find all posts by this user
Quote this message in a reply
05-26-20, 04:26 PM
Post: #2
RE: Axiom 7 and airmar compatibility
Hello tsing,

A Axiom 7 will preform the same as the e7 in regards to the NMEA2000/STNG buss.
The equipment you have will work the same with the Axiom 7 as it did with the e7.

i would recommend upgrading to the Axiom 7. If the e7 is flush mounted there is even a adapter plate to fit the Axiom 7 in the e7 footprint.

Chris,
Find all posts by this user
Quote this message in a reply
05-28-20, 05:13 PM
Post: #3
RE: Axiom 7 and airmar compatibility
Thanks for the reply. I was looking at the lighthouse 3 software, will it work with my e7 with hybrid touch ? It seems like one place I looks says no and one place says yes .

Thanks theo
Find all posts by this user
Quote this message in a reply
06-01-20, 12:44 AM
Post: #4
RE: Axiom 7 and airmar compatibility
Hello Theo,

Lighthouse 3 software will NOT work on an e7. The e7 can only work on Lighthouse 2.

Happy boating and kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)