Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] AIS700 works only with ProAIS2 connected (USB)
05-25-20, 03:13 AM (This post was last modified: 05-28-20 07:32 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] AIS700 works only with ProAIS2 connected (USB)
Hello,

I have an issue with my new AIS700.

It works perfectly BUT only when it is connected to proAIS2 (usb cable to my PC + "connect" button in application proAIS2). As soon as I disconnect (with the disconnect button in the application) I loose the signal on my C70 MFD.
My system is:

AIS 700 <--> C70 MFD (NMEA0183)
RN300 tracer <--> C70 (seatalk)
RN300 tracer --> VHF navicom (NMEA0183)

the AIS700 is NEW.

Before installing it I was sending AIS signal from VHF to MFD C70 (NMEA0183) and it was working perfectly.

Thank you for you support,

Benjamin
Find all posts by this user
Quote this message in a reply
06-03-20, 05:07 AM
Post: #2
RE: [LW11] AIS700 works only with ProAIS2 connected (USB)
Dear bhollard,

Can you send over a wiring diagram and the software revision in the AIS700?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)