Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Raymarine EV pilot and Furuno GP1971 integration
05-26-20, 01:16 AM (This post was last modified: 05-31-20 11:39 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Raymarine EV pilot and Furuno GP1971 integration
I want to purchase a Raymarine ev 150and interface it with a furuno gp1971. Can some one tell me all the connectors I would need. Thank you
Find all posts by this user
Quote this message in a reply
05-31-20, 11:44 PM
Post: #2
RE: [TG11] Raymarine EV pilot and Furuno GP1971 integration
Hello Briant808,

You'd just need a Devicenet-STNG adaptor cable to connect the Furuno's Devicenet-type NMEA2000 connector into the autopilot's SeatalkNG network. If those are the only two devices in the NMEA2000 system you should have 1 spare socket in the pilot' supplied cabling kit. The adaptor cable is part A06075 and it's 1m long.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)