Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] E 120 Classic to Axiom7
05-30-20, 01:15 AM (This post was last modified: 06-09-20 11:35 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] E 120 Classic to Axiom7
Can I interface E120 MFD and its charts , platinum +, with Axiom 7? If so how is it done.
I Don't see a difference in the detail charts and the fishing charts on the Axiom. Is a different chart card needed?
Find all posts by this user
Quote this message in a reply
06-09-20, 11:37 PM
Post: #2
RE: [TG11] E 120 Classic to Axiom7
Hello Thefin25,

No, I'm sorry to say that's not possible, the general rule is that only displays that are running the same software can be networked over SeatalkHS / Raynet / Ethernet to share radar, chart, sonar etc.. You will need a separate chart card for each.


Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)