Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] GPS rs150 to backbone
05-30-20, 05:26 PM (This post was last modified: 06-09-20 11:44 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] GPS rs150 to backbone
I'm having trouble connecting my rs150 to my axiom 9. I bought a backbone and still cant rogue out what wires I need
Find all posts by this user
Quote this message in a reply
06-09-20, 11:48 PM
Post: #2
RE: [TG11] GPS rs150 to backbone
Hello slrebert,

What backbone part number or numbers was it that you bought? What display are you trying to connect the RS150 to, an Axiom MFD? We can give you more specific connection information if we know exactly what you have.

If your display was an Axiom then you would get backbone kit T12217. This contains everything you need - the red/black power cable goes into one white spur socket, the RS150 into a second and the Axiom into the third via the supplied Devicenet-STNG adaptor cable. The two blue backbone terminators go into the blue sockets on the ends.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)