Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Element 9 and ST60s
06-11-20, 12:00 AM
Post: #2
RE: [TG11] Element 9 and ST60s
Hello Pete,

Yes, the Element displays should be able to show NMEA2000 depth data, and there should be a Depth option in Data Source selection (though most commonly there is no need to do a manual source selection and I always recommend not doing one unless you have to).

Was Depth not listed as an option in Data Sources, or was it listed as an option but no sources were listed as available?
Can you see depth in a Databox on the autopilot display (with the Pilot View set to Multiple)?
What does the data item on the Chart page on your Element show for depth - just dashes --.-m or something else?

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Element 9 and ST60s - Pete7 - 06-01-20, 01:48 PM
RE: [TG11] Element 9 and ST60s - Tom - Raymarine - Moderator - 06-11-20 12:00 AM
RE: [TG11] Element 9 and ST60s - Pete7 - 06-16-20, 01:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)