Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VHF static coming from networking cables
06-15-16, 02:18 PM (This post was last modified: 06-15-16 03:55 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: VHF static coming from networking cables
Hi Chuck - My answers are inline.

How much distance is separating:
- the radios from the network switch - 6" - 12" but tested with networks switch a couple feet away and still had static

- the radios from the DSM300 - several feet

- the radio antenna cables from the network cables (specify minimum distance) - They are very close (2") in one spot then seperate to 6" - 12".

How many RF chokes have been applied to the network cables? I currently have 2 on each ends of the DSM and Radar cables
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: VHF static coming from networking cables - Defiance Sportfishing - 06-15-16 02:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)