Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting analog transducer to Axiom 9
06-05-20, 10:20 AM
Post: #1
Connecting analog transducer to Axiom 9
Is it possible to connect a three wire analog depth transducer to an Axiom 9 via seatalk without a depth instrument?
Find all posts by this user
Quote this message in a reply
06-23-20, 03:34 PM
Post: #2
RE: Connecting analog transducer to Axiom 9
Hello phoenixsf29,

This is not possible. You can connect that transducer to a itc-5 and then to the Axiom.

Chris,
Find all posts by this user
Quote this message in a reply
06-25-20, 10:14 AM
Post: #3
RE: Connecting analog transducer to Axiom 9
You can connect the analog 200khz transducer to a iTC-5 with an Axiom ? I thought it had to be with an i70. Will the Axiom calibrate iTC-5 without an i70 in the system as well? Thanks!
Find all posts by this user
Quote this message in a reply
06-26-20, 08:45 AM
Post: #4
RE: Connecting analog transducer to Axiom 9
The ability to calibrate the itc-5 has been added in the software for the Axiom. As long as you have one Axiom or one i70 you have the ability to operate and calibrate the itc-5 with its transducer(wind,speed,depth).
Find all posts by this user
Quote this message in a reply
06-28-20, 10:10 AM
Post: #5
RE: Connecting analog transducer to Axiom 9
Can you please explain how to calibrate the itc-5 with the Axiom as well as the i70.
Find all posts by this user
Quote this message in a reply
07-02-20, 09:27 AM
Post: #6
RE: Connecting analog transducer to Axiom 9
Hello Tamrow,

Please see this link for the Axiom operation manual which includes the calibration instruciutons, https://www.raymarine.com/service-and-su...documents/

I have also attached the guide for the i70 which also contains the calibration instructions,

Regards,


Attached File(s)
.pdf  i70s Installation and operation instructions 81364-1-EN.pdf (Size: 2.94 MB / Downloads: 1094)
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)