Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ECI-100 Reporting Wrong Data
06-15-16, 12:46 PM
Post: #1
ECI-100 Reporting Wrong Data
I have v17 installed on my MFDs (e147). No matter what, the instruments and displays are reporting that the Oil Temp in both engines is 32.1 F. I used the N2K analyzer to look at the ECI-100 engine data. Both engines whether they are cold or hot report 32.050 F in the NMEA2K message and thus 32.1F on the displays. Obviously this is incorrect. Here is my setup:

Raymarine ECI-100
Volvo D6-EVC-E (Port)
Volvo D6-EVC-E (Starboard)

Please advise. - john
Find all posts by this user
Quote this message in a reply
06-15-16, 02:15 PM
Post: #2
RE: ECI-100 Reporting Wrong Data
Welcome to the Raymarine Forum jeokeefe,

As the reported engine oil value is essentially 0.0 degrees Celsius, it is possible that that there may be a fault within processing performed by the ECI-100 or that the Volvo system is not measuring this engine parameter. Have you checked the Volvo engine displays to verify whether they are reporting engine oil temperature?
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)