E120 fails to read known good CF card
|
06-07-20, 09:35 PM
Post: #1
|
|||
|
|||
E120 fails to read known good CF card
I have an E120 that I have been using in a slave mode (connected via SeaTalkHS) to a master E120 (that has the chart card).
My Master E120 failed so I though I would just pop the chart card out of the master unit and into the slave unit but the clave unit refuses to read the card. I have confirmed that the card is good (it has a current Navionics subscription and can be read and updated in my PC) and of course the card was working just fine in the master E120 before it failed (backlight failure). I have verified that there is no damage to the CF card socket - all pins are there, none are bent and there is no corrosion. I have run the Verify CF card test and the operation says: Failed to write to CF card. I have also tried to save my waypoints and routes to the CF card and it also fails. Does anyone have any idea what might be wrong? Thanks, |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
E120 fails to read known good CF card - bobatkins - 06-07-20 09:35 PM
RE: E120 fails to read known good CF card - Chris - Raymarine - Moderator - 06-26-20, 03:44 PM
|
User(s) browsing this thread: 1 Guest(s)