Smart Controller --> x30 Autopilot

[nickvh]

Hi

I have the base station wired correctly to an X30, red/yellow/ground, the hand controller connects quickly to the base station.

However, there is no data on the controller for wind/depth etc (i do see Heading for some reason).

What am I doing wrong!!!

thanks

Nick

[Chris - Raymarine - Moderator]

Hello nickvh,

The X30 does not bridge data from STNG to the Seatalk port it has.
To get that information on the Smartcontroller you will want to install a E22158 inline on the STNG buss and move the base station to the yellow port on the converter.