Raymarine forum / Raymarine Forums / Autopilots v / S2/SHS Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
S2/SHS Problem
07-27-16, 01:14 PM
Post: #13
danderer Offline
Member
***
 		Posts: 60
Joined: May 2016
Reputation: 0
RE: S2/SHS Problem
Thanks for the prompt reply but I'm confused here. In response 10 you indicated my design, including connecting the ST1 to the master E80 Classic, was correct.

Your latest response seems to say that was wrong: that I need to disconnect the ST1 from the E80 and buy a SeaTalk to SeaTalkng Converter.

Q1: Has something changed to invalidate my initial design?

Q2: Is buying the SeaTalk to SeaTalkng Converter the only solution, or just a best practice?

Q3: Are there other solutions short of buying this additional equipment that "may" work, subject to testing?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
S2/SHS Problem - danderer - 06-19-16, 06:04 PM
RE: S2/SHS Problem - danderer - 06-21-16, 03:02 PM
RE: S2/SHS Problem - danderer - 06-22-16, 12:40 PM
RE: S2/SHS Problem - danderer - 06-22-16, 01:08 PM
RE: S2/SHS Problem - danderer - 07-02-16, 02:07 PM
RE: S2/SHS Problem - danderer - 07-27-16, 11:22 AM
RE: S2/SHS Problem - danderer - 07-27-16 01:14 PM
RE: S2/SHS Problem - danderer - 07-27-16, 01:53 PM
RE: S2/SHS Problem - danderer - 07-27-16, 02:45 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication