Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to connect Airmar B275 LH-W to CP-570
06-13-16, 09:01 PM
Post: #1
how to connect Airmar B275 LH-W to CP-570
can you please specify what connection box is required, make and model number, to connect this transducer to a cp 570.
Find all posts by this user
Quote this message in a reply
06-14-16, 08:34 AM
Post: #2
RE: how to connect Airmar B275 LH-W to CP-570
Welcome to the Raymarine Forum banksdd,

While Airmar, Inc. may provide products and instructions for using Airmar branded CHIRP transducers with the CP470 and CP570, Raymarine does not support use of third party transducers with its fishfinding products. The CP470 and CP570 are exclusively supported for use with the CHIRP transducers found here. Damage to a CP470/CP570 or to third party fishfinder transducers resulting from use of a third party transducer with a Raymarine fishfinder may not be covered under Raymarine's product warranty.
Find all posts by this user
Quote this message in a reply
06-17-16, 08:48 AM (This post was last modified: 06-17-16 10:46 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: how to connect Airmar B275 LH-W to CP-570
Thank You for your response. When can we expect to be able to use these new wide beam transducers with raymarine products.
Find all posts by this user
Quote this message in a reply
06-17-16, 10:50 AM
Post: #4
RE: how to connect Airmar B275 LH-W to CP-570
Your feature/product request has been logged to consider introduction of wide beam CHIRP transducers for use with the CP470/CP570 CHIRP Sounder Modules.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)