Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 4-pro display issues
06-21-16, 06:02 PM
Post: #1
Dragonfly 4-pro display issues
When I was last on the water, my unit started having display issues. I recently updated the software and am still experiencing the issue.

Has anyone had this similar issue?

How did you correct it?


Thanks,


Kevin
Find all posts by this user
Quote this message in a reply
06-22-16, 02:03 PM (This post was last modified: 06-22-16 02:03 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Dragonfly 4-pro display issues
Welcome to the Raymarine Forum Kevin,

Should you have:
- updated the display with v12.09 Dragonfly software, and
- verified that the transom mounted Dragonfly transducer has not kicked up, and
- verified that the vessel be located within the water and should the depth of the water be at least 3' below the transducer, but not more than 600', and
- the sounder produces the plot shown within your photo,
then it is recommended that the Dragonfly display be sent to Raymarine’s Product Repair Center to be bench tested/serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)