Raymarine forum / Raymarine Forums / Multifunction Displays v / Fuel Flow meters not showing correctly on a78 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuel Flow meters not showing correctly on a78 MFD
06-07-19, 10:04 AM
Post: #15
kingspade Offline
Junior Member
**
 		Posts: 11
Joined: Jun 2016
Reputation: 0
RE: Fuel Flow meters not showing correctly on a78 MFD
I should responded sooner on this. The fix for my issues was as simple as purchasing the Actisense NGT-1 which is when used with their NMEA Reader software allows viewing of NMEA 2000 messages with configuration options, enabling the set-up of all products on the NMEA 2000 bus.

Once I had that interface, I just unplugged the port sensor since it already is showing port, and then changed the starboard meter's instance and viola! I have working meters for each engine!
Next Gen Charters
1998 Baha Cruisers 285 Weekender Hardtop
Twin Merc 350 Inboards
Raymarine a78 Wi-Fi MFD - Evolution EV-150
CHIRP DownVision,RD418D Digital Radar Dome, ClearPulse, CPT-100, SeatalkNG
(2)Lowrance NMEA 2K Fuel flow sensors, Depth Raider probe,
(3) Cannon Mag-5 Downriggers
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Fuel Flow meters not showing correctly on a78 MFD - kingspade - 06-07-19 10:04 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication