Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C70 Classic replacement
06-25-16, 06:57 PM
Post: #1
C70 Classic replacement
I am looking to replace a 2004 C70 classic with either an ES or A MFD. I have some limited space on the dash where the C70 is flush mounted (a 2004 SeaRay Sundancer 300). The ES 98 or the A98 seem to be the closest fit. If I replace the C70 with either of these units, will there be issues regarding mounting the new unit? Such as enlarging the [censored], needing to have a mounting kit beyond what comes with the new unit? Will there be any gaps that need to be filled - or will either of these units fully cover the area where the C70 presently is? I have about 1 inch on each side of the C70 and about 1/2 inch above and below the C70 at the present time.

Thanks.
Find all posts by this user
Quote this message in a reply
06-29-16, 10:14 AM (This post was last modified: 06-29-16 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: C70 Classic replacement
Welcome to the Raymarine Forum Jim,

Unfortunately, non of Raymarine's currently manufactured MFDs are designed to exactly fill the footprint or fit within the cut out for a surface mounted C70 C-Series Classic MFD. Raymarine's Manuals and Doc web page includes links where surface mount templates may be downloaded for one's products and those being considered. These templates include the requested dimensional data. The following surface mount templates should be helpful in identifying the footprint and cutouts for each of the items specified:
C70 MFD: click here
a9x MFD: click here
eS9x MFD: click here
Find all posts by this user
Quote this message in a reply
06-30-16, 08:54 PM
Post: #3
RE: C70 Classic replacement
Thanks.
Find all posts by this user
Quote this message in a reply
07-01-16, 07:28 AM
Post: #4
RE: C70 Classic replacement
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)