Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E28081 Wind Transducer Service Kit Instructions
06-04-18, 03:52 PM (This post was last modified: 06-04-18 04:15 PM by Chuck - Raymarine - Moderator.)
Post: #11
RE: [CA11] E28081 Wind Transducer Service Kit Instructions
Ahhh. Understood. Thanks.
Is there a written process available for recalibration along with a drawing of the replacement procedure?
Jim
Find all posts by this user
Quote this message in a reply
06-05-18, 09:02 AM
Post: #12
RE: [CA11] E28081 Wind Transducer Service Kit Instructions
Jim,

The instructions for calibration of the Wind Instrument may be found here. No written instructions are supplied with the A28167 Raymarine Masthead Wind Transducer Service Kit, as replacement steps are obvious for anyone having basic homeowner skills. A phillips head screw holds the vane to the vane shaft and similarly, a phillips head screw holds the cups to the wind speed shaft. Both the vane and cups feature an indexing flat to match the respective flats on the vane shaft and wind speed shaft.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)