Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding depth data to ax5, cx5, e7, ex5, eSx5, and gS-Series MFDs
01-20-16, 11:02 AM (This post was last modified: 01-12-17 11:04 AM by Chuck - Raymarine - Moderator.)
Post: #1
Adding depth data to ax5, cx5, e7, ex5, eSx5, and gS-Series MFDs
Adding depth data to ax5, cx5, e7, ex5, eSx5, and gS-Series MFDs

Unlike the ax8, eSx8, ax7, cx7, e7D, ex7, and eSx7 MFDs, the ax5, cx5, e7, ex5, eSx5, and gS-Series MFDs are not designed to be directly mated to a transducer. Depth reporting may be added to the system via any of the following methods:

- interface the MFD a compatible fishfinder sounder module (ex. CP370, CP100, CP470, or CP570) with compatible fishfinder transducer
- interface the MFD to an depth reporting instrument:
.....- i40 Depth/Bidata Instrument Display with analog depth transducer
.....- i50 Depth/Tridata Instrument Display with analog depth transducer
.....- i70 Multifunction Instrument Display with iTC-5 Analog Instrument Transducer Converter and analog depth transducer
.....- i70 Multifunction Instrument Display with SeaTalkng Smart depth transducer
- interface the MFD to a third party NMEA 0183 or NMEA 2000 Smart Depth Transducer ... such transducers cannot be calibrated for depth offset and no depth related alarms may be configured with such transducer.

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)