Raymarine forum / Raymarine Forums / Multifunction Displays v / A128 Heading 'UP'

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A128 Heading 'UP'
07-20-16, 05:40 AM
Post: #1
Dhacker@craworld.com Offline
Junior Member
**
 		Posts: 27
Joined: Apr 2016
Reputation: 0
A128 Heading 'UP'
I have a new a128 that is working very well but has one annoying issue. The display reverts to North up whereas my preference would be heading 'up', (the boat icon would stay pointing to the top of the screen at all times). At this time the a128 is not connected to any network or other external cOmponents.

Any assistance to make this change and make the change 'stick' thru power cycles would be appreciated.

Thanks

Dave
Find all posts by this user
Quote this message in a reply
07-20-16, 10:17 AM (This post was last modified: 07-20-16 10:28 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A128 Heading 'UP'
Welcome to the Raymarine Forum Dhacker,

Please click here to view a FAQ addressing this subject. When operating with the latest a/c/e/eS/gS-Series MFD software, the Chart application page(s)/pane(s) will retain the previously configured orientation setting and will revert to that orientation after the vessel gets underway and is making way.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication