Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP200 with CP100 and DSM300
08-04-16, 01:13 PM
Post: #1
CP200 with CP100 and DSM300
I am considering adding a CP200 side vision sonar and transducer to my current setup. I have an A98 with built-in down-vision and CPT100 transducer mount on the starboard transom. I also have a DSM300 with thru-hull sonar transducer. If I add the CP200 would I have any issues mounting the CPT200 transducer near the CPT100? What is the optimum mounting configuration? Also, will I need any additional cables to connect to the A98? I have an HD418 color radar installed as well. What are the wiring requirements for the CP200 sonar module? Just power and the transducer cable?
Find all posts by this user
Quote this message in a reply
08-09-16, 10:31 AM
Post: #2
RE: CP200 with CP100 and DSM300
Welcome to the Raymarine Forum dhill67,

Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)