Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Humidity problems with i70 display
08-11-16, 10:59 AM (This post was last modified: 04-22-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Humidity problems with i70 display
Hello, we have a costumer experiencing issues with i70 displays and hope you can help us.

The problem is that sometimes moisture appears inside the display, we have replaced the i70 entirely and the new one showed the same behavior. Have you had this issue before? what can be done to solve it?

I attach some pictures.

Thanks in advance,

Martin Sivolella
Find all posts by this user
Quote this message in a reply
08-12-16, 02:50 PM (This post was last modified: 04-22-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Humidity problems with i70 display
Welcome to the Raymarine Forum MS Aeromarine,

Such condensation is not normal. Should condensation be detected within a product, then it is recommended that the product be sent to Raymarine’s Product Repair Center to be serviced.
Find all posts by this user
Quote this message in a reply
08-15-16, 11:00 AM
Post: #3
RE: Humidity problems with i70 display
Hello Chuck, thanks for your answer,

We contacted Robin Nadeau from Warranty department when the first equipment failed, they told us to replace it by a new one. Then, the second equipment also showed the same behavior.

We have both equipments in our company now. Is necessary to send them to Raymarine’s Product Repair Center?

I await your comments,

Martin
Find all posts by this user
Quote this message in a reply
08-15-16, 12:26 PM (This post was last modified: 04-22-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Humidity problems with i70 display
Yes.
Find all posts by this user
Quote this message in a reply
04-20-19, 11:50 AM (This post was last modified: 04-22-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Humidity problems with i70 display
I am having the same issue with a p70 autopilot control head. Condensation forming inside the screen. Can my dealer replace this for me so I don't have to go without an autopilot?
Find all posts by this user
Quote this message in a reply
04-22-19, 12:38 PM (This post was last modified: 04-22-19 12:39 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA11] Humidity problems with i70 display
Welcome to the Raymarine Forum closereach77,

Many dealers, particularly Premier Dealers who perform Certified Installations will keep spares onhand for such instances. The greatest chance of achieving the end sought (i.e. not be without an autopilot control head) would be contact a Certified Raymarine Installer rather then an installer who isn't certified by Raymarine and to request that the visit support replacing the autopilot control head because of fogging. In this way the installer may seek and advance replacement to bring to the boat. If the autopilot was installed as part of a Certified Raymarine Installation and it has been less than 3 years since the product purchase, then this replacement should be covered under warranty.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)