Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cpt-120 temperature
08-26-16, 10:55 PM
Post: #1
cpt-120 temperature
I have a CPT-120 interfaced to a A128. The temperature has always varied widely and ranged from 5-20 degrees F over the actual temperature. It fluctuates over 10 degrees in a matter of minutes. Today it hit over 100 degrees F so I decided to write this post.

Downvision and chirp work great and give nice images.

What's wrong here?

Thanks
Find all posts by this user
Quote this message in a reply
08-30-16, 09:52 AM
Post: #2
RE: cpt-120 temperature
Welcome to the Raymarine Forum Strbass28,

The problem described is generally indicative of a problem with the transducer's thermistor. Please click here to view a FAQ addressing this subject. Far less often, the problem is rooted in a failure of the MFD's fishfinder circuitry which is responsible for converting thermistor resistance to temperature value. To rule out the latter, the MFD may be tested with another transducer. Should it be determined that the boat's thermistor has failed, then it would be necessary to either replace the transducer or add another source of speed/temperature data as had been identified within the FAQ. If still within warranty, the failed transducer may be sent Raymarine's Product Repair Center for replacement.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)