Raymarine forum / Raymarine Forums / Autopilots v / St4000 - wiring and voltage drop

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
St4000 - wiring and voltage drop
09-01-16, 07:51 AM (This post was last modified: 09-01-16 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: St4000 - wiring and voltage drop
James,

The sensed deviation is too high. Before relocating the fluxgate compass, it is recommended that the fluxgate compass be tested per the FAQ found herehere and replaced if found to be faulty. Should the test not indicate a faulty fluxgate compass, then the fluxgate compass should relocated further from the engine block and alternator.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 09-01-16 07:51 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication