Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Electronics upgrade to eS95
09-04-16, 04:59 PM
Post: #1
Electronics upgrade to eS95
I will be installing a eS95 at he helm of a sailboat. I currently have three ST60+ instruments D/S/W up next to the wheel. I have a Raystar120 on the stern and a TRIDATA down in the cabin. What is the maximum number of Seatalk devices that can be connected to the Seatalk to Seatalkng converter. Can I select which GPS data source to use in the system? The boat also has an old Pathfinder Radar that I would also like to connect to the seatalk buss to provide GPS data to the radar.

Thanks
george
Find all posts by this user
09-08-16, 03:13 PM
Post: #2
RE: Electronics upgrade to eS95
Hello George,
Up to Five SeaTalk1 devices per converter are allowed.
With the introduction of converter software version 2.01 in October 2015, support for the Multiple Data Selection (MDS) feature is available. Therefore data such as Speed, Depth, Wind, Heading & GPS bridged from SeaTalk1 to SeaTalkng can be selected as the system data source.
Find all posts by this user
09-08-16, 05:10 PM
Post: #3
RE: Electronics upgrade to eS95
Thank you for the information. We have ordered the material for the installation.
Find all posts by this user
09-09-16, 03:42 PM
Post: #4
RE: Electronics upgrade to eS95
Your'e welcome. Have a great day!
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)