The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / ST4000 plus w/ E80 as navigator over SeaTalk 1 bus

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST4000 plus w/ E80 as navigator over SeaTalk 1 bus
09-14-16, 10:25 AM
Post: #1
Phil Niles Offline
Junior Member
**
 		Posts: 13
Joined: Jun 2016
Reputation: 0
ST4000 plus w/ E80 as navigator over SeaTalk 1 bus
Hello all,
Has anybody used the E80 as the source of ST4000+ track information over the SeaTalk 1 bus. I want to allow the ST4000+ to continue to use the analog compass (which is directly connected to it) but discontinue use of the NMEA input terminals in favor of SeaTalk 1 bus. If this works, I should be able to put a Maretron SC300 fast heading sensor onto the NMEA 0183 bus for use by the E80 with the bridging function (heading) disabled.

phil
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST4000 plus w/ E80 as navigator over SeaTalk 1 bus - Phil Niles - 09-14-16 10:25 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication