Raymarine forum / Raymarine Forums / Autopilots v / ST4000 plus w/ E80 as navigator over SeaTalk 1 bus

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST4000 plus w/ E80 as navigator over SeaTalk 1 bus
09-14-16, 12:15 PM (This post was last modified: 09-14-16 12:16 PM by Chuck - Raymarine - Moderator.)
Post: #3
Phil Niles Offline
Junior Member
**
 		Posts: 13
Joined: Jun 2016
Reputation: 0
RE: ST4000 plus w/ E80 as navigator over SeaTalk 1 bus
Thank you for the confirmation, what got me into this predicament is my E80 does not want to "see" the heading data from the ST4000+ on a recurring basis. When the MFD powers up it sees the heading data displayed by the AP and writes it (one time) to the data bar along with aligning the own boat icon. I have verified E80 chart presentation mode and observed #84 and 9C SeaTalk 1 datagrams being output by the pilot. The MFD has replaced a C70 which was working OK.

Phil
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST4000 plus w/ E80 as navigator over SeaTalk 1 bus - Phil Niles - 09-14-16 12:15 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication